LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2013 >> Grand Cherokee Laredo, AWD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Differential Pressure >> Removal >> Diesel
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Differential Pressure: Removal: Diesel

Fig 1: Exhaust Differential Pressure Sensor & Pressure Tubes
GC0146863Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION, REMOVAL .
  4. Disconnect the differential pressure sensor harness connector.
  5. Disconnect the differential pressure sensor hoses (2).
  6. Remove bolt and the differential pressure sensor.
  7. If necessary, remove mounting bolts (3) securing the differential pressure sensor tubing to transmission.
    Fig 2: Differential Pressure Sensor Tubing & Diesel Particulate Filter
    GC0146634Courtesy of CHRYSLER GROUP, LLC
  8. If necessary, remove the differential pressure sensor tubing (6) from the diesel particulate filter (4).
scientia non olet · About LEMON Manuals