LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2013 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Electronic Control Modules (Service Information)) >> Module, Glow Plug >> Installation >> Installation >> Left Hand Drive
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Left Hand Drive

WARNING: This page is about a different car, the 2012 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Glow Plug Relay
GC0124645Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (3) is located near the front of the battery (1).

  1. Connect the wire harness connector (4) to the glow plug module.
  2. Position the glow plug module (3) and install the mounting pin (2).
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals