LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2013 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System) >> Engine >> Fan, Cooling >> Installation >> Diesel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fan, Cooling: Installation: Diesel

WARNING: This page is about a different variant/trim than selected.
Fig 1: Electric Fan Jumper Harness
GC0130722Courtesy of CHRYSLER GROUP, LLC
  1. Install the fan assembly into the lower support mounts. Tighten the bolts to 9 N.m (80 in. lbs.).
  2. Connect the electric fan wire harness connector (1) at the fan.
    Fig 2: Fan Shroud, Coolant Recover Bottle Hose & Bolts
    GC0155075Courtesy of CHRYSLER GROUP, LLC
  3. Install the upper fan seal.
  4. Install the upper fan mounting bolts (3). Tighten the bolts to 9 N.m (80 in. lbs.).
  5. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION for 3.6L.
  6. Install the coolant recovery bottle hose (2) to fan shroud (1).
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals