LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Cherokee Sport, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Standard Procedure >> Program The BCM (Body Control Module)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Program The BCM (Body Control Module)

NOTE:

After installing a brand new BCM, the scan tool will be unable to identify the vehicle. Manual VIN entry into the scan tool must be used to continue scan tool communication.

  1. Turn the ignition on.
  2. With the scan tool, perform the following procedure in the BCM Miscellaneous Functions: Restore BCM PROXI Configuration*.
    NOTE:

    NOTE: The Restore BCM PROXI Configuration uses the VIN and sales code information from DealerCONNECT to reconfigure the vehicle. After running the Restore BCM PROXI Configuration, the scan tool will restart to begin a new diagnostic session with the vehicle.

  3. If instructed by the scan tool, run the following procedure in the BCM Miscellaneous Functions: PROXI Configuration Alignment*.
  4. With the scan tool, perform the following procedure in the RFH Miscellaneous Functions: BCM Replaced*.

* - Denotes that a user message indicating that the scan tool procedure is required may automatically display to the technician during the tool connection process

NOTE:

Customer programmable features in the BCM may need to be reset back to the customers preferred settings.

scientia non olet · About LEMON Manuals