LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Clutch System) >> Clutch Assembly, Modular >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clutch Assembly, Modular: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Modular Clutch Assembly
GC0082353Courtesy of CHRYSLER GROUP, LLC
WARNING:

Chrysler LLC does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing and disposing of dust and debris.

  1. Install clutch module onto input shaft.
  2. Install transaxle into vehicle. Refer to T355 INSTALLATION .