LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 217 (Electronic Control Modules (Service Information)) >> Transmission Control Module >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Module: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: TCM Out
GC0083998Courtesy of CHRYSLER GROUP, LLC
  1. Install the TCM mounting bracket holes (1) over the two studs on the bulkhead.
    Fig 2: TCM Unplugged
    GC0083997Courtesy of CHRYSLER GROUP, LLC
  2. Install the two nuts (4) to mounting studs (1) on the bulkhead.
  3. Position the body harness aside to gain access to the mounting studs.
  4. Tighten nuts (4) to 15 N.m (133 in. lbs.).
  5. Plug in electrical connectors (2) to TCM (3).
  6. If a new TCM is installed a learn procedure must be performed.