LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Compass >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Compass: Installation: Installation

NOTE:

The Remote Compass Module (RCM) must be calibrated after installation.

Fig 1: Identifying Remote Compass Module (RCM), Instrument Panel, Screws & Electrical Connector
GC0098553Courtesy of CHRYSLER GROUP, LLC
  1. Position the RCM (1) on top of the instrument panel (2).
  2. Install the screws (3) that secure the RCM to the instrument panel.
  3. Connect the electrical connector (4).
  4. Install the instrument panel top cover. Refer to COVER, INSTRUMENT PANEL, INSTALLATION .
  5. Reconnect the negative battery cable.
  6. Calibrate the compass module.
scientia non olet · About LEMON Manuals