Plug, Glow: Installation: Installation
WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Clean glow plug bay and install glow plug.
- Tighten glow plugs to 10 N.m (89 lbs. in.).
- Connect glow plug electrical connector.
- Install cylinder head cover. Refer to COVER(S), CYLINDER HEAD, INSTALLATION or COVER(S), CYLINDER HEAD, INSTALLATION .
- Install engine cover. Refer to INSTALLATION or INSTALLATION .
- Connect negative battery cable.