Boost Pressure Sensor: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Mixing Chamber, Harness Connector, Boost Pressure Sensor & Bolts

Courtesy of CHRYSLER GROUP, LLC

Install the boost pressure sensor (3) into mixing chamber (1). Tighten bolts (4) to 8 N.m (71 in. lbs.).
Connect the boost pressure sensor wire harness connector (2).

Fig 2: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Install the engine cover (1).
Connect the negative battery cable.