2.2L Diesel

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Upper Generator Mounting Bolt & Generator

Courtesy of CHRYSLER GROUP, LLC

Install the generator (1). Tighten bolt finger tight.

Fig 2: Identifying Generator Mounting Retainer
Courtesy of CHRYSLER GROUP, LLC
Install the bottom generator mounting retainer (2). Tighten upper and lower bolts to 28 N.m (21 ft. lbs.).

Fig 3: Identifying Electrical Connector
Courtesy of CHRYSLER GROUP, LLC
Install the B+ cable. Tighten nut (2) to 10 N.m (89 in. lbs.).
Connect the generator field wire harness connector (1).

Fig 4: Identifying Upper Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Connect the upper radiator hose from the radiator.
Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .

Fig 5: Upper Core Support Seal Push Pins & Radiator Core Support Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the radiator core support.

Fig 6: Identifying Power Steering Reservoir
Courtesy of CHRYSLER GROUP, LLC
Position the power steering reservoir (2) and securely tighten the bolt (1).

Fig 7: Identifying Hood Release Cable
Courtesy of CHRYSLER GROUP, LLC
Connect the hood release cable (1).

Fig 8: Identifying Radiator Support Shroud
Courtesy of CHRYSLER GROUP, LLC
Install the radiator support shroud.

Fig 9: Identifying Main Drive Belt
Courtesy of CHRYSLER GROUP, LLC
Install the serpentine belt (3). Refer to BELT, SERPENTINE, INSTALLATION .
Evacuate and fill the cooling system. Refer to STANDARD PROCEDURE .

Fig 10: Identifying Bolts & Belly Pan
Courtesy of CHRYSLER GROUP, LLC
If equipped, install the belly pan.
Connect the negative battery cable.

Fig 11: Identifying Air Inlet Tube
Courtesy of CHRYSLER GROUP, LLC
Install the air inlet tube.