Sensor, Accelerator Pedal Position: Installation

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Accelerator Pedal Mounting Nut Tightening Sequence

Courtesy of CHRYSLER GROUP, LLC

CAUTION:

The accelerator pedal and mounting nuts need to be torque in a mandatory torque sequence or damage could result to the pedal assembly.

Install the accelerator pedal. Using the tightening sequence shown, tighten nuts to 16 Nm (142 lbf-in.).

Courtesy of CHRYSLER GROUP, LLC
Connect the accelerator pedal harness connector (1).
Connect negative battery cable.