LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Front Suspension) >> Front >> ARM, Upper Control >> Installation >> Right Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Right Side

WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the upper control arm to the vehicle.
  2. Install the upper control arm front flag bolt. Tighten the nut to 122 N.m (90 ft. lbs.). with full vehicle weight. 
  3. Install the upper control arm rear flag bolt. Tighten the nut to 122 N.m (90 ft. lbs.). with full vehicle weight. 
  4. Install the air box.
  5. Install the upper ball joint nut. Tighten the nut to 41 N.m (30 ft. lbs.) plus an additional 90° turn.
  6. Install the right side tire and wheel assembly. Refer to Tires and Wheels/Wheels - Standard Procedure .
  7. Lower the vehicle.
  8. Set the toe. See Front Suspension/Wheel Alignment - Standard Procedure .