LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Camshaft Position >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Camshaft Position: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cam Position Sensor & Retaining Bolt
GC0138082Courtesy of CHRYSLER GROUP, LLC
  1. Install the camshaft position sensor (1). Tighten bolt (2) to 6 N.m (53 in. lbs.).
    Fig 2: Camshaft Position Sensor Harness Connector
    GC0138081Courtesy of CHRYSLER GROUP, LLC
  2. Connect the cam position sensor harness connector (1).
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals