Module, Glow Plug: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Glow Plug Relay (Module), ECM Mounting Bracket, Electrical Connector & Pin

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The glow plug module (1) is located in the engine compartment. It is attached to the Powertrain Control Module (PCM) mounting bracket (2).

Connect glow plug module wire harness connector (3) to glow plug module (1).
Position the glow plug module to mounting bracket (2) and install pin (4).