Fan, Cooling: Installation: Diesel
WARNING: This page is about a different variant/trim than selected.
- Install the fan assembly into the lower support mounts. Tighten the bolts to 9 N.m (80 in. lbs.).
- Connect the electric fan wire harness connector (1) at the fan.
- Install the upper fan seal.
- Install the upper fan mounting bolts (3). Tighten the bolts to 9 N.m (80 in. lbs.).
- Install the air cleaner body.
- Install the coolant recovery bottle hose (2) to fan shroud (1).
- Connect the negative battery cable.