Charge/Test Menu

Fig 1: Charge/Test Menu Icon 1

Courtesy of CHRYSLER GROUP, LLC

Automatically tests and charges battery, starting, and charging system. Generates a warranty code for Replace and Bad Cell decisions.

Fig 2: Charge/Test Menu Icon 2

Courtesy of CHRYSLER GROUP, LLC

Pre Delivery Inspection (PDI): For testing delivered vehicles and lot maintenance. Uses the same inputs as a diagnostic charge.

Fig 3: Charge/Test Menu Icon 3

Courtesy of CHRYSLER GROUP, LLC

Dual Battery Charge mode allows the charger to be used with dual battery systems.

Fig 4: Charge/Test Menu Icon 4

Courtesy of CHRYSLER GROUP, LLC

Makes high output current available to boost charge an in-vehicle battery and assist in starting the engine.

Fig 5: Charge/Test Menu Icon 5

Courtesy of CHRYSLER GROUP, LLC

Provides a timed charge that ranges from 5 to 120 minutes or a continuous charge that ends when you press the STOP key.

Fig 6: Charge/Test Menu Icon 6

Courtesy of CHRYSLER GROUP, LLC

In this mode the charger can provide a trickle charge for long term, low amp battery charging.

Fig 7: Charge/Test Menu Icon 7

Courtesy of CHRYSLER GROUP, LLC

Generates 15-digit warranty codes for physically defective batteries or customer good will.

Fig 8: GR8 Battery Tester

Courtesy of CHRYSLER GROUP, LLC

Control module: Backlit graphical display and keypad for data entry.
ON/OFF switch: ON/OFF switch Turns power on and off to the GR8.
STATUS light: Lights in conjunction with beeping alarm to indicate transitions and warnings.
Data card slot: For future upgrades via a data card. The slot contains a plastic filler card for protection.