Sensor, Knock: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Knock Sensor Location

Courtesy of CHRYSLER GROUP, LLC

The knock sensor bolts into the side of the cylinder block in front of the starter under the intake manifold.

Fig 2: Knock Sensor & Bolt

Courtesy of CHRYSLER GROUP, LLC

Attach electrical connector to knock sensor.
Install knock sensor. Tighten knock sensor bolt to 22 N.m (195 in. lbs.). Over or under tightening effects knock sensor performance, possibly causing improper spark control.
Connect the negative battery cable.