Section 139 (Rear Axle): Specifications: Specifications
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
AXLE
| DESCRIPTION | SPECIFICATION |
|---|---|
| Axle Ratio | 3.21/3.73 |
| Differential Case Flange Runout | 0.076 mm (0.003 in.) |
| Differential Case Clearance | 0.12 mm (0.005 in.) |
| Ring Gear Diameter | 213 mm (8.25 in.) |
| Ring Gear Backlash | 0.12 - 0.20 mm (0.005 - 0.008 in.) |
| Ring Gear Runout | 0.12 mm (0.005 in.) |
| Pinion Torque To Rotate - Original Bearings | 1 - 2.2 N.m (10 - 20 in. lbs.) |
| Pinion Torque To Rotate - New Bearings | 1 - 3.4 N.m (10 - 30 in. lbs.) |
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Differential Cover Bolts | 41 | 30 | - |
| Bearing Cap Bolts | 135 | 100 | - |
| Ring Gear Bolts | 122 | 90 | - |
| Pinion Nut Minimum | 285 | 210 | - |
| Pinion Mate Shaft Screw | 26 | 19 | - |
| Axle Damper | 61 | 45 | - |
| Adjuster Lock Screw | 26 | 19 | - |
Ring Gear Bolts - Diesel Engines: Follow service procedure to tighten ring gear bolts on vehicles equipped with diesel engine and 3.21 gear ratio.