Module, Intrusion Transceiver: Installation: Installation

Fig 1: Intrusion Transceiver Module & Connector

Courtesy of CHRYSLER GROUP, LLC

1. Position the Intrusion Transceiver Module (ITM) (2) into the mount integral to the overhead console housing. Be certain that all of the latch features are fully engaged
2. Reconnect the intrusion module sensor pigtail wire harness connector (1) to the ITM connector receptacle.
3. Reinstall the overhead console into the headliner. Refer to CONSOLE, OVERHEAD, FRONT, INSTALLATION .
4. Reconnect the negative cable to the battery.