3.0L Diesel

Fig 1: Cooling Fan Assembly Retaining Tabs

Courtesy of CHRYSLER GROUP, LLC

Install the cooling fan assembly into the vehicle and engage both retaining tabs (1).

Fig 2: Cooling Fan Wire Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Connect the cooling fan wire harness connector (1).

Fig 3: Upper Fan Shroud Cover
Courtesy of CHRYSLER GROUP, LLC
Install the upper shroud cover (1). Apply pressure downwards until the cover snaps into place past clips (2).
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .

Fig 4: Lower Cooling Fan Closeout Panel
Courtesy of CHRYSLER GROUP, LLC
Install the lower cooling fan closeout panel (1) by applying pressure till the cover snaps into place onto the cooling fan shroud.
Install the front skid plate. Refer to PLATE, SKID, FRONT, INSTALLATION .
Remove the support and lower the vehicle.

Fig 5: Clamps & Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the resonator and bracket assembly. Tighten the bolts (1) to 10 N.m (89 in. lbs.).

Fig 6: Charge Air Hoses & Hose Clamps
Courtesy of CHRYSLER GROUP, LLC
Install the Charge Air Cooler (CAC) hoses (1) and securely tighten the hose clamps (2).

Fig 7: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Install the engine cover (1).
Connect the negative battery cable.