LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Sensor, Exhaust Temperature >> Installation >> Exhaust Temperature Sensor 1/2
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Exhaust Temperature Sensor 1/2

Fig 1: Identifying Exhaust Temperature Sensor
GC0169885Courtesy of CHRYSLER GROUP, LLC
  1. Install the exhaust temperature sensor (1) and tighten to 45 N.m (33 ft. lbs.).
  2. Connect the exhaust temperature sensor wire harness connector.
  3. Remove the support and lower the vehicle.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals