LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Cherokee Overland, 3.2L Eng VIN S, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.0L Diesel
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

2.0L Diesel

GC0159853Courtesy of CHRYSLER GROUP, LLC
  1. Install the Engine Cooling Temperature (ECT) sensor (2) to cylinder head and tighten to the proper torque. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the ECT sensor wire harness connector (1).
  3. Install the engine cover. Refer to the appropriate service information article.
  4. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals