Torque Specifications
WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Intermediate Shaft to Steering Gear Bolt | 60 | 44 | - | * NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Outer Tie Rod End to Steering Knuckle Nut | 40 | 30 | - | * NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Steering Column to Dash Frame Bolts | 20 | 15 | - | |
| Steering Column to Dash Frame Nuts | 20 | 15 | - | * NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Steering Gear to Crossmember | 110 | 81 | - | |
| Steering Wheel to Column Nut | 50 | 37 | - | |
| Tie Rod Jam Nut | 56 | 41 | - |