Module, Powertrain Control (Pcm): Installation: Gas
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Install the powertrain control module (PCM) (1). Tighten the three nuts (4) to 4.5 N.m (40 in. lbs.).
- Connect and lock the electrical connectors (1) to the PCM.
- Connect the negative battery cable.NOTE:
If a new PCM is installed, it must be programed with the original Vehicle Identification Number (VIN) and mileage. If this is not done, a Diagnostic Trouble Code (DTC) may set.
NOTE:If a new PCM is installed, refer to MODULE PROGRAMMING .
- If a new PCM is being installed, use a scan tool and program the new PCM with the original VIN and vehicle mileage.