Module, Radio Receiver: Removal
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Insert straight pins into the four openings (2) within the radio to compress the inner retaining clips (1).
- Gently wiggle radio back and forth while pulling out releasing the inner locating pin.
- Disconnect the radio electrical connectors.CAUTION:
Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.
- Disconnect the antenna connectors and remove the radio from the vehicle.