LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Electronic Control Modules (Service Information)) >> Module, Glow Plug >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Glow Plug: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0146750Courtesy of CHRYSLER GROUP, LLC
  1. Install the glow plug module (2) and securely tighten the retaining nut (1).
  2. Connect the Glow Plug Module harness connector (3).
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals