Standard Procedure - Re-Initialize And Re-Teach

The following steps are necessary initialize and teach a module that has been previously initialized and taught.

1. With the glass closed, press and hold the glass close switch for 10 seconds.
2. Continue to press and hold the glass close switch until the glass moves to full vent up and bounces back to vent up.
3. The shade will then move to close, bounce back, and stops at the halfway position.
4. Once both the shade and glass have stopped, release the glass close switch and press it again within 5 seconds.
5. The shade moves to full open, and the glass will move to full open.
6. The glass will move to close.
7. The shade will move to close. Hold the switch until the glass and shade have completed their movements.
8. Release the glass close switch. Glass and shade are now initialized and taught.