Module, Power Top Control, Full Open Retractable Roof (PTCM): Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Drop rear of headliner down as needed to gain access to the module. Refer to HEADLINER, REMOVAL .
- Disconnect the electrical connectors (3) from the module.
- Remove the two screws (1) and separate the module (2) from the roof system.