LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Electronic Control Modules (Service Information)) >> Module, Adaptive Cruise Control (ACCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Adaptive Cruise Control (ACCM): Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159564Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the wire harness to Adaptive Cruise Control (ACC) bracket routing fasteners (2).
  4. Disconnect the wire harness connector (3) from the ACC module (4).
  5. Remove the two bolts (1) securing the ACC module mounting bracket to the support cross bracing.
  6. Remove the ACC module with the bracket from the vehicle.
  7. Remove the four retainers that secure the ACC module to the ACC module mounting bracket.
scientia non olet · About LEMON Manuals