Module, Power Top Control, Full Open Retractable Roof (PTCM): Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the module (2) onto the power full open retractable roof assembly.
- Install the two mounting screws (1).
- Connect the electrical connectors (3).
- Install the headliner. Refer to HEADLINER, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
- Re-initialize roof assembly. Refer to MODULE, POWER TOP CONTROL, FULL OPEN RETRACTABLE ROOF (PTCM), MODULE PROGRAMMING .