LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Power Distribution) >> Module, Power Inverter >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Power Inverter: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0162208Courtesy of CHRYSLER GROUP, LLC
  1. Position the Power Inverter Module (PIM) to the bracket so that the upper (1) and lower (2) screws can be inserted securing the module to the bracket.
    GC0162280Courtesy of CHRYSLER GROUP, LLC
  2. Position the PIM and bracket to the vehicle for installation. Use a screw (1) to secure the bracket arm in place.
    GC0162332Courtesy of CHRYSLER GROUP, LLC
  3. Insert the screw (1) securing the bracket located next to the ventilation door motor (2).
  4. Connect the electrical connector to the PIM.
    GC0162274Courtesy of CHRYSLER GROUP, LLC
  5. Install the ventilation duct (1). Refer to DUCT, FLOOR DISTRIBUTION, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals