LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Compass Limited, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal And Installation >> Removal And Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine cover.
    GC0166089Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the turbo boost pressure sensor wire harness connector (1).
    GC0163890Courtesy of CHRYSLER GROUP, LLC
  4. Remove the screw and the boost pressure sensor (1).
scientia non olet · About LEMON Manuals