LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Starting System (Service Information)) >> Sensor, Neutral Position >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the neutral position sensor is not damaged.
  2. Position the sensor then engage the retainers.
  3. Connect the neutral position sensor wire harness connector.
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Connect the diagnostic tool. Go to the ECM "Miscellaneous Functions" menu and launch the self learning neutral position sensor procedure.
scientia non olet · About LEMON Manuals