U1932-86-Operational Mode Status Signal From Body Control Module- Signal Invalid

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The Scan Tool may display the description name of this Diagnostic Trouble Code differently with the following below:

U1932-86-OPERATIONAL MODE STATUS SIGNAL FROM CAN - SIGNAL INVALID

NOTE:

This DTC indicates a communication issue has occurred between the Sending control module (Body Control Module - BCM) and the Reporting control module(s) that set this fault.

NOTE:

Treat this DTC as a IMPLAUSIBLE SIGNAL DTC when performing the COMMUNICATION DIAGNOSTIC PROCEDURE.

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .