DECKLID/Hatch/Liftgate/Tailgate/Swing Gate: Liftgate: Removal

Courtesy of CHRYSLER GROUP, LLC

Open and support the liftgate.
Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, remove the upper rear headliner trim.
WARNING:
Do not disconnect the support rod cylinders with the liftgate closed. The support rod pistons are operated by high pressure gas. This pressure could cause damage or personal injury if they are removed while the pistons are compressed.

WARNING:
Failure to follow these instructions may result in possible serious or fatal injury.

Courtesy of CHRYSLER GROUP, LLC
Remove the support struts (2) from the liftgate(1). Refer to PROP, GAS, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Disconnect the wire harnesses and the washer hose.
Using a grease pencil or equivalent, mark the hinge location.
Remove the liftgate to body fasteners (1 and 3) and remove liftgate from vehicle.