LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Boost Pressure: Installation: Installation

WARNING: This page is about a different car, the 2015 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intake Air Temperature Sensor/Boost Pressure Sensor, Fastener & Connector
GC0146601Courtesy of CHRYSLER GROUP, LLC
  1. Install the boost pressure sensor (2) and securely tighten fastener (3).
  2. Connect the boost pressure sensor wire harness connector (1).
    Fig 2: Engine Cover
    GC0146436Courtesy of CHRYSLER GROUP, LLC
  3. Install the engine cover (1).
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals