Module, Active Damping Control: Installation: Installation
WARNING: This page is about a different car, the 2016 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Slide the Active Damping Control Module (ADCM) (2) into position making sure the latches secure the ADCM.
- Connect the wire harness connectors to the ADCM (2).
- From behind/under the LF seat, install the cover panel on the electronic module tub (4).
- Connect the negative battery cable. Refer to CABLES, BATTERY, INSTALLATION .
- Perform the ADCM Verification Test.