Module Removal

WARNING: This page is about a different car, the 2015 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

This procedure is for Alpine audio system. For all other audio systems, refer to AMPLIFIER, REMOVAL .

Fig 1: Fasteners, Wire Harness Connectors & ANC Module Bracket

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Remove the right quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL .
Remove the subwoofer. Refer to SPEAKER, REMOVAL .
Disconnect the two wire harness connectors (3) from the Active Noise Cancellation (ANC).
Remove the fasteners (1), (4) and remove the ANC module .
Remove the retainers from the ANC module bracket (2).