LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Wrangler JK Rubicon, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Intake Air Pressure >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Intake Air Pressure: Installation

GC0131128Courtesy of CHRYSLER GROUP, LLC
  1. Check condition of sensor O-ring.
  2. Install the Intake Air Pressure (IAP) sensor (5) and securely tighten fasteners.
  3. Install IAP sensor wire harness connector (4).
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals