Key Fob Programming

Using Service Library, obtain a Personal Identification Number (PIN) prior to starting the programming routine.

Sitting in the vehicle with the doors closed is a requirement for this routine to complete properly.

The key fob must be held against the Keyless Ignition Node (KIN) during key fob programming. 

1. Using the diagnostic scan tool, select the Radio Frequency Hub (RFH).
2. Select the "Miscellaneous Functions" tab.
3. Select and run the "Program Ignition FOBIKs" procedure and follow the screen prompts.

If the key fob fails to program or is inoperative. Refer to DIAGNOSIS AND TESTING .