Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENTS |
|---|---|---|---|---|
| Engine to Bell-housing Bolt | 49 | 36 | - | |
| Extension Housing to Transmission Bolt | 27 | 20 | - | |
| Manual Park Release Lever Shaft Nut | 10 | - | 89 | |
| Manual Park Release Cable to Transmission | 20 | 15 | - | |
| Manual Park Release Grommet to Bracket | 7 | - | 79 | |
| Manual Park Release Lever to Transmission Shaft | 20 | 15 | - | |
| Manual Park Release Shield to Transmission | 17 | 12 | - | |
| Output Shaft Flange Nut | 60 | 44 | - | |
| Output Speed Sensor Bolt | 8 | - | 71 | |
| Park Pawl Lock Rod Guide Plate Bolt | 10 | - | 89 | |
| Park Pawl Shaft Plug | 35 | 26 | - | |
| Shifter Assembly Bolts | 9 | - | 79 | |
| Transmission Oil Pan Bolt | 10 | - | 89 | |
| Transmission Oil Pan Drain Plug | 9 | - | 80 | |
| Transmission Oil fill Plug | 35 | 26 | - | |
| Transmission Oil Pump Assembly To Case Bolts | Specific bolts need to be pre-tightened. Refer to PUMP, TRANSMISSION OIL, REMOVAL AND INSTALLATION . | |||
| Transmission Oil Pump Housing To Cover Bolt | 5 + 45° | - | 44 + 45° | |
| Torque Converter to Flex Plate Bolt | 55 | 41 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications.
NOTE:
If old fastener must be re-used, Loc-Tite® must be applied to the threads. |
| Transmission Mount to Adapter | 30 | 22 | - | |
| Transmission Mount to Extension Housing | 55 | 41 | - | |
| Valve Body Bolt | 8 | - | 70 | Specific tightening sequence. Refer to VALVE BODY, REMOVAL AND INSTALLATION . |
| Shift Lever Assembly to Floor Pan Bolts | 6 | - | 53 | |
| Transmission Shift Knob | 3 | - | 26.5 | |
| Transfer Case Shift Knob | 2 | - | 17 | |
| Manual Park Release to Shift Lever Assembly | 8 | - | 70 | |