Module, Air Suspension Control (ASCM): Removal
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the LF seat to its full forward position.
- Disconnect and isolate the negative battery cable. Refer to CABLES, BATTERY, REMOVAL .
- From behind/under the LF seat, remove the cover panel from the electronic module tub (4) to access the Air Suspension Control Module (ASCM) (2).
- Disconnect the wire harness connectors from the ASCM (2).
- Release the integral latches that secure the ASCM (2) to the mounting bracket and slide the module upward to remove from the vehicle.