LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Grand Cherokee Laredo, AWD, Full Time T/Case Control >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Fuel Pump Control >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Fuel Pump Control: Installation

GC0180925Courtesy of CHRYSLER GROUP, LLC
  1. Position the fuel pump control modules in the mounting bracket.
  2. Install the fuel pump control module mounting nuts (1) and securely tighten.
  3. Connect the fuel pump control module wire harness connectors (2) to the module.
  4. Install the rear carpet assembly. Refer to CARPET, FLOOR, INSTALLATION .
  5. Install the rear seat. Refer to SEAT, FRONT, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals