Torque Specifications
WARNING: This page is about a different car, the 2021 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | SPECIFICATION | COMMENT |
|---|---|---|
| Active Air Dam to Frame Nut | 18 N.m (13Ft. Lbs.) | - |
| Active Vibration Cancellation Actuator to Frame Bolt | 20 N.m (15Ft. Lbs.) | - |
| Active Vibration Cancellation Module to Body Nut | 9 N.m (80 In. Lbs.) | - |
| Adaptive Cruise Control Sensor to B and C Pillars | 8 N.m (71 In. Lbs.) | - |
| Aux Power Distribution Center (PDC) to Vertical Post Bolt | 11 N.m (8 Ft. Lbs.) | - |
| B+ Input to PDC Nut | 11 N.m (8 Ft. Lbs.) | - |
| Body Control Module (BCM) to Bracket Nut | 9 N.m (80 In. Lbs.) | - |
| Body Ground to Left Fender | 12 N.m (9 Ft. Lbs.) | - |
| Bracket Seal to Air Dam Bolt | 5 N.m (44 In. Lbs.) | - |
| Drivetrain Control Module (DTCM) Bracket Nut | 7 N.m (62 In. Lbs.) | - |
| Electronic Limited Slip Differential (ELSD) ModuleNut | 7 N.m (62 In. Lbs.) | - |
| Electronic Steering Lock (ESL) Module Bolts | 6 N.m (53 In. Lbs.) | - |
| Horn Bracket Bolt | 6 N.m (53 In. Lbs.) | - |
| Occupant Restraint Controller to Body Nut | 8 N.m (71 In. Lbs.) | - |
| Park Guide Bracket to Case Bolt | 13 N.m (10 Ft. Lbs.) | - |
| Power Inverter Module (PIM) Retaining Bolts | 6 N.m (53 In. Lbs.) | - |
| Powertrain Control Module (PCM) to Bracket Bolt | 8 N.m (71 In. Lbs.) | - |
| PCM to Bracket Nut | 8 N.m (71 In. Lbs.) | - |
| PCM Bracket to Body Bolt | 6 N.m (53 In. Lbs.) | - |
| PCM Ground Wire Install | 7 N.m (62 In. Lbs.) | - |
| PCM Ground Wire Nut | 20 N.m (15Ft. Lbs.) | - |
| Power Distribution Center (PDC) Lower Cover to Battery Tray Nut | 5 N.m (44 In. Lbs.) | - |
| PDC to Cross Beam Nut | 9 N.m (80 In. Lbs.) | - |
| PDC to Wiring Connector | 4 N.m (44 In. Lbs.) | - |
| Power Inverter Module to CCB Bolt | 6 N.m (53 In. Lbs.) | - |
| Security Gateway Module (SGW) to Instrument Panel Bolt | 5 N.m (44 In. Lbs.) | - |