DECKLID/Hatch/Liftgate/Tailgate/Swing Gate: Latch: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the latch (2) onto the inside of the liftgate (1).
2. Install and tighten the three bolts (3) that secure the latch (2) to the inside of the liftgate.
3. Tighten the bolts to 12 N.m (9 ft. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

4. Connect the latch release cable (2) to the handle and seat the support clips.
5. Connect electrical connectors (3, 5) to the latch (4).

   Courtesy of CHRYSLER GROUP, LLC

6. Install the trim panel. Refer to PANEL, TRIM, INSTALLATION .
7. Connect the battery negative cable.