LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 924 (Electronic Control Modules (Service Information)) >> Module, Radio Receiver >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Radio Receiver: Removal

WARNING: This page is about a different car, the 2018 Fiat 500L. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the switch pod. Refer to POD, SWITCH, REMOVAL .
    GC0176814Courtesy of CHRYSLER GROUP, LLC
  3. Remove the four mounting fasteners (1a).
  4. Carefully remove radio (1b).
    GC0176818Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the radio (1a) electrical connector (3a).
    CAUTION:

    Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.

  6. Disconnect the antenna connectors (2) and remove the radio from the vehicle.