Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Auxiliary Battery M6 Nut to Negative Cable | 5 | - | 44 | - |
| Auxiliary Battery M6 Nut to Positive Cable | 5 | - | 44 | - |
| Auxiliary Battery Positive Post - M6 Double Ended Torx Stud | 6 | - | 53 | - |
| Auxiliary Battery Negative Post - M6 Double Ended Torx Stud | 6 | - | 53 | - |
| Auxiliary Battery Tray To Battery Tray | 8 | - | 71 | - |
| B+ Wire To PCR Positive Terminals | 11 | 8 | - | - |
| Battery Ground To Body | 8 | - | 71 | - |
| Battery Ground To Frame | 8 | - | 71 | - |
| Battery Positive Cable M6 | 7 | - | 62 | - |
| Battery Positive Cable M5 | 7 | - | 62 | - |
| Battery Bracket Bolt | 5 | - | 44 | - |
| Battery Tray Bolts | 6 | - | 53 | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Battery Tray Nuts | 4 | - | 35 | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Battery Tray To Front Bracket Support | 4 | - | 35 | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Generator B+ Nut | 20 | 15 | - | - |
| Generator Bolts To Engine Bracket 3.6L | 63 | 46 | - | - |
| Generator To Generator Bracket 3.6L | 24 | 18 | - | - |
| Generator Bracket to Lower Engine Block 3.6L | 24 | 18 | - | - |
| Intelligent Battery Sensor (IBS) To Negative Post | 18 | 13 | - | - |
| PCR Mount To Ground | 11 | 8 | - | - |
| For RHD only: Ground To PCR Bracket | 9 | - | 80 | - |
| Negative Battery Cable to Body | 8 | - | 71 | - |
| Negative Cable Stud | 15 | 11 | - | - |
| Negative Cable To Intelligent Battery Sensor (IBS) | 15 | 11 | - | - |
| Remote Start Antenna (RSA) to Cab Back | 6 | - | 53 | - |
| Start Bolt To Engine 3.6L | 47 | 35 | - | - |
| Starter B+ Nut | 11 | 8 | - | - |