LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2020 >> Gladiator Altitude, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Technical Specifications >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. Comments
Hub And Bearing Bolts 102 75 -  
Hub And Bearing Nut 136 100 -  
Splash Shield to Knuckle 10 7 -  
Lower Control Arm Rear Bolt 140 Plus 145° 103 Plus 145° -  
Lower Control Arm Front Bolt 140 Plus 145° 103 Plus 145° -  
Lower Ball Joint Nut (initial torque) 20 15 -  
Lower Ball Joint Nut (final torque) 45 33 -  
Shock Absorber Lower Bolt 70 Plus 55° 52 Plus 55° -  
Shock Absorber Upper Bolt 70 Plus 55° 52 Plus 55° -  
Shock Absorber Upper Bolt (Mojave) 130 96 -  
Stabilizer Bar Bolts 63 46 - Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications.
Stabilizer Bar Link Upper Nut 93 69 -  
Stabilizer Bar Link Lower Bolt (Right Side) 80 59 -  
Stabilizer Bar Link Lower Bolt (Left Side) 100 74 -  
Track Bar Frame Bolt 70 Plus 115° 52 Plus 115° -  
Track Bar Axle Bolt 70 Plus 155° 52 Plus 155° -  
Upper Control Arm Front Bolt 55 Plus 185° 41 Plus 185° -  
Upper Control Arm Rear Bolt 50 Plus 135° 37 Plus 135° -  
Upper Ball Joint Nut 75 55 -