LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2020 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (Electronic Control Modules (Service Information)) >> Module, HVAC >> Installation >> Installation - LHD
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation - LHD

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0184558Courtesy of CHRYSLER GROUP, LLC
  1. Position the HVAC module to the HVAC housing.
  2. Install the two screws (2) that secure the HVAC module to the HVAC housing and tighten securely.
  3. Connect the wire harness connectors (1) to the HVAC module.
  4. Install the passenger side instrument panel silencer.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  6. Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals