Module, Adaptive Cruise Control (Acc): Installation: Bracket

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The molded plastic ball socket clips in the Adaptive Cruise Control (ACC) module mounting bracket MUST be removed, discarded and replaced with new ball socket clips any time the ACC module is removed from the ACC module mounting bracket.

Install the new molded plastic ball socket clips (5) into the ACC module mounting bracket (3), located below the center of the front bumper support bar (1). The clips are installed from the back side of the bracket by rotating them clockwise.
Position the mounting bracket to the underside of the bumper support bar.
Install and securely tighten the ACC module mounting bracket screws (4) to the support bar.
Install the ACC module onto the ACC module mounting bracket. Refer to MODULE, ADAPTIVE CRUISE CONTROL (ACC), INSTALLATION .